10
Hob Element / Griddle Options
The controls for the radiant elements may be set at any position between high and low to provide
the desire level of heating. An individual green neon for each element, will glow when the element
is switched 'ON' to show that there is power to the element.
Start cooking at the highest setting and change to a lower setting when the desired temperature is
reached.
For maximum speed and economy, it is most important that cooking utensils should cover the
element completely, and have perfectly flat bases. Any part of the element which glows bright red is
not making effective contact with the base of the utensil, and this decreases the life and efficiency of
the element.
Utensils which are significantly larger than the element may also reduce element life and efficiency.
Turn the thermostat control to the desired temperature. An individual amber neon for each griddle
element, will glow when the element cycles on and extinguish when the element cycles off. When
the amber neon goes out, the desired temperature has been reached and the griddle is ready for
use.
Turning the control to a higher setting than required will not shorten the heat up tim e.
Fig 4
Griddle Plate
Open Radiant Elements
Solid Radiant Elements
