18
1. With the cuff wrapped around your arm, press the
START/STOP button.
Do not inflate the cuff unless it is wrapped around your arm. All digits will
light up to check the display functions. The checking procedure will be
completed after about 3 seconds.
2. After all symbols disappear, the display will
show “00”. The monitor is
“Ready to Measure”
and will
automatically inflate the cuff to start
measurement. The cuff will then begin deflating
as measurement continues.
Note:
This monitor will re-inflate automatically if the system detects
that your body requires more pressure for measurement.
3. When the measurement is completed, the cuff will
deflate entirely. Systolic pressure, diastolic pressure
and pulse will be shown simultaneously on the LCD
screen.
The measurement is then automatically
stored into memory.
Note:
• This monitor automatically turns off approximately
1 minute after last
operation. You may also press the
START/STOP button to turn the unit
off.
• To interrupt the measurement, you may press the
START/STOP
(recommended), MEMORY or DATE/TIME SET (
)
buttons. The
cuff will deflate immediately after a button is pressed.
START
STOP
MEMORY
IB-WGNBPA-730_A--01.indd 18
2013/8/6 下午5:03
