12
13
USING THE AC ADAPTER
1. Connect the AC adapter with the AC adapter jack as shown
below.
2. Please use only the AC adapter included with this monitor.
Note:
• Date and time will need to be reset if AC adapter is
unplugged and unit is without batteries.
• When the AC adapter is your main power supply, make sure
the adapter plug can be easily removed from the unit.
• Please unload the batteries when operating with an AC
adapter for an extended period of time. Leaving the batteries
in the compartment for a long time may cause leakage,
which may lead to damage to the unit.
• No batteries are needed when operating with an AC
adapter.
INSTALLING BATTERIES
1. Press down on latch and lift
the battery cover to open the
battery compartment.
2. Install or replace 4 “AA ” sized
alkaline batteries in the battery
compartment according to
the indications inside the
compartment.
3. Close the battery cover by
pushing in the top end of the
battery door.
Replace the batteries if:
• The weak battery symbol appears on the display.
• When any button is pressed and nothing is displayed on the
screen.
Note:
• Date and time will need to be reset if batteries are removed or
replaced.
• Replace all batteries at one time (as simultaneous set). Use
only 1.5V “AA” alkaline batteries.
• The supplied batteries are for test only, they may be discharged
earlier than batteries you buy in stores.
• Remove batteries when unit is not in use for extended periods
of time.
• Clean contacts on battery and in battery compartment with a
soft dry cloth each time you install batteries.
• Batteries are hazardous waste. Do not dispose of them together
with the household garbage.
Battery
Cover
AC Adapter
Input: 100-240V~0.18A-0.20A 50/60Hz
Output: 6V DC 1A 6W Max
Triple Check
Rest Assure
ON
ON
AM/PM
OFF
OFF
Connect AC
adapter here
