7
8
HOW THIS BLOOD PRESSURE MONITOR WORKS
This monitor uses innovative technology to detect your
blood pressure. This technology enables the monitor to
automatically inflate and deflate at the appropriate level for
each individual. With one touch of a button, the cuff will
automatically inflate to block the blood flow through your
artery. Once the measurement is complete, the cuff will
automatically deflate.
Please note that any muscle movement during inflation will
cause measurement error. When measurement is complete,
the monitor will display your systolic pressure, diastolic
pressure, and pulse readings.
The monitor automatically finds where your measurement
results fall on the NIH’s National Heart Lung and Blood
Institute’s table and provides a cue if your reading falls into
one of the stages that could potentially indicate increased risk.
Please refer to page 19 for more information on this feature.
The appearance of the
icon indicates that a pulse
irregularity consistent with an irregular heartbeat was detected
during measurement. Refer to page 20 for more information
on the Irregular Heartbeat Detector.
NAME/FUNCTION OF EACH PART
START/STOP
Button
MEMORY RECALL
Button
Air Tube
and Connector
Arm Cuff
LCD Display
Other Accessories:
4 “AAA” size, 1.5V alkaline batteries (included)
Battery Cover
(Located on
bottom of unit)
Note:
The
START/STOP and M buttons are also used to set the date and time.
