34
35
Cleaning
WARNING
Danger of electric shock
■
Do not bring the device into contact with moisture or water.
■
Always pull out the power supply plug before starting to clean the device.
Device
Cleaning
Housing
Use a microfiber cloth to remove light and stubborn dirt.
Illuminant
Clean off dirt with a dust brush or a dry, soft cloth
NOTE
Do not clean the illuminant with water. Even slightest residues on the
illuminant can cause bursting of the illuminant.
13. Accessories and options
You find optimal accessories for your device in our webshop.
14. Disposal and environmental protection
Please dispose of your device at your local disposal area at no charge.
11. Troubleshooting
Problem
Possible cause
Remedy
The device is switched
on, but does not show
any function.
Mains cable not plugged in
or not plugged in correctly.
Power packs are almost
exhausted
Plug the mains cable in
correctly
Charge the power packs
The illuminant does
not light
The device is switched off
Switch on the device
The device has not enough
power
Increase the power of
the dimmer control
The device is defective
Repairs must only be
carried out by a skilled
electrician
12. Maintaining the device
WARNING
Danger of electric shock and danger of fire due to short circuit.
Have the device repaired by an electrician immediately.
WARNING
Danger of cutting and splintering caused by breaking or bursting illuminants.
