Copy of Instruction Manual
Mul 2 Ball Heads
Gewerbering 26
86666 Burgheim
Tel. +49/84 32 / 9489-0
Fax: +49/84 32 / 9489 - 8333
eMail:
1 Quick-release plate – Mount the camera sturdily and securely on the quick-release plate.
2 Safety lever – Should snap into place with the camera when mounting the quick-release plate.
3 Fixing screw of ball.
4 Friction screw – For adjusting the smooth-running of the ball.
5 Friction screw – For adjusting the smooth-running of the horizontal adjustment.
Advice
Danger of damages through the falling down of the camera by the non-proper use of quick-release
plate and mounting of the ball head on the tripod.
Please always make sure, that the fastening screw is tightened firmly and that the safety lever
of the quick-release plate is snapped into place.
Please always make sure, that the ball head is screwed on the tripod securely and sturdily.
Chcek the thread before every use.
Included in delivery
: 1x walimex pro Tripod Multiflex with flexible center column and individual
useable monopod, 2x Ball Heads with quick-release plates and 1/4 inch camera connection, 1x Allen
key, 1x convenient carrying bag
Use as monopod:
Open the butterfly screw (A) at the feet of the tripod
and remove the monopod. Afterwards, you can
mount the required head on the monopod.
Use with one ball head:
You can adjust the height of the center column
through the butterfly screw (B).
Use with 2 ball heads:
Remove the center rod by pressing the 2 studs (C)
and extending the center rod. You can open the joint
with the butterfly screw (D) and adjust the required
angle. Afterwards, you can pull through the center
rod and tighten. You can mount the ball heads on
the left and right side of the fastened center column.
Tripod
Ball Head big
Max. Height
approx. 191cm
Dimensions
(LxWxH)
approx. 15x9,5x10cm
Min. Height
approx. 25cm
Connection
1/4 inch
Carrying Length
approx. 75cm
Max. Load Capacity
approx. 6kg
Length of the Center
Column
approx. 36cm
Weight
approx. 600g
Angle of Center Column
approx. 120°
Ball Head small
Max. Load Capacity
approx. 8kg
Dimensions
(LxWxH)
approx. 13x6,5x6cm
Weight
approx. 2230g
Connection
1/4 inch
Monopod
Max. Load Capacity
approx. 1,5kg
Max. Height
approx. 154cm
Weight
approx. 190g
Min. Height
approx. 52cm
Set
Max. Load Capacity
approx. 8kg
Total Weight
approx. 3020g
Weight
approx. 515g
Material
scratch-resistant
magnesium and
aluminium alloy
2
S
i
c
h
e
r
u
n
g
s
h
e
b
e
l
3
4
5
1
A
C
D
B
1
2
S
i
c
h
e
r
u
n
g
s
h
e
b
e
l
3
