13
10/08
6.3
Screw in and out of lamp
WARNING
Danger of cutting and splitting through breaking or bursting lamp
Don´t let the lamp fall down.
Don´t touch the lamp with bare hands. Just touch the lamp at the plastic
socket or wear cotton gloves or use a clean cloth.
ADVICE:
Possible discolouration through burn marks on the lamp
.
1.
Switch off device.
See
Switch the device on and off
.
2.
Disconnect from power supply:
Plug out power cord.
3.
Let the device cool down.
CAUTION!
Danger of burning on lamp. Let the device cool down for
approx. 20 minutes.
4.
Screw in lamp:
Screw in the lamp carefully.
WARNING!
Danger of electric shock. Always screw in the lamp as to
avoid touching in the sockets, when the device is switched on.
5.
Screw out lamp:
Screw out the lamp carefully and store it securely.