OPERATOR’S MANUAL
BOLT TORQUES
The critical required torque values for the airlock fasteners are identified in
Table 8-3
. For any fasteners not specified in
Table 8-3
,
refer to
Table 8-4
and
Table 8-5
for imperial and metric bolt torque requirements respectively. Check the tightness of bolts
periodically. Replace any damaged or lost hardware with the same strength fastener. Torque values indicated in the following tables
are valid for non-greased or non-oiled threads and heads. Unless otherwise specified, do not grease or oil bolts or cap screws. When
using locking elements, increase the listed torque values by 5%. Reference
Figure 8-11
and
Figure 8-12
for proper grade
identification.
Table 8-3: Fastener torque specifications
1008
1210
1314
1618
2018
2224
Blade Tip Bolts
Figure 8-3
—
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
Wiper Blade Bolts
Figure 8-4
24 ft-lb
(32.5 Nm)
—
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
—
Rotor Shaft Lock Collar
Figure 8-5
28 ft-lb
(38.0 Nm)
28 ft-lb
(38.0 Nm)
—
—
—
—
Rotor Shaft Lock Nut
Figure 8-6
—
Minimum
40 ft-lb
(54.2 Nm)
Minimum
40 ft-lb
(54.2 Nm)
Minimum
60 ft-lb
(81.3 Nm)
Minimum
85 ft-lb
(115.2 Nm)
Minimum
85 ft-lb
(115.2 Nm)
Lock Nut Set Screw
Figure 8-7
—
29 ft-lb
(39.3 Nm)
29 ft-lb
(39.3 Nm)
29 ft-lb
(39.3 Nm)
29 ft-lb
(39.3 Nm)
29 ft-lb
(39.3 Nm)
End Plate Bolts
Figure 8-8
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
Seal Plate Bolts
Figure 8-9
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
Air Vent Plug
Figure 8-10
—
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
24 ft-lb
(32.5 Nm)
—
24 ft-lbs
(32.5 Nm)
8-4
00-144478-0 A
SPECIFICATIONS
Summary of Contents for Airlock 1008
