OPERATOR’S MANUAL
Pressure Monitoring Kit
For systems operating with a pressurized discharge, an air pressure gauge may be installed to
better monitor the performance of the system or to identify potential issues.
To install a pressure monitoring kit, proceed as follows:
1. Clear the area of bystanders, especially small children.
2. Place all controls in neutral, stop and lock-out the power source, and wait for all moving
parts to stop.
3. Ensure all required components, as detailed in
Table 7-6
, are ready and available.
Table 7-6: Pressure monitoring kit components
Item
Description
Walinga Part Number
Quantity
A
HALF COUPLING, 4FP
58-08815-6
1
B
FITTING, PUSH-IN, 4T-4MP
81-18109-6
1
C
PRESSURE GAUGE, 4MP, 0 TO 15 PSI
27-00718-6
1
D
COUPLING, 103-B, 1/4”
81-07112-6
1
E
FITTING, PUSH-IN, 4T-4MP 90
81-18110-6
1
F
1/4” AIR TUBE
73-03867-6
As Required
4. Examine the pressurized air inlet assembly, if it is equipped with a half coupling [
Item A
]
and plug, remove the plug. If there is no half coupling installed, drill a hole into the inlet
assembly pipe and fit and weld the half coupling [
Item A
] into place.
NOTE:
The connection point must be installed on a straight section of tubing on the inlet
(clean air) side of the airlock.
DO NOT
mount the connection point on an elbow, the
underside of the tubing, or on the product discharge side of the airlock.
MAINTENANCE AND ADJUSTMENTS
00-144477-0 A
7-39
Summary of Contents for Airlock 1008
