19
20
ACCESSORY GUIDE
SEAT CUSHION & BACKREST
Walker Bay
®
Seat Cushion and Backrest is available in 2 versions: Basic and Deluxe.
The Basic Seat & Backrest is made of reinforced fabric with meshed foam padding for
support and ventilation. The Deluxe Seat & Backrest is made of ergonomic and stylish
molded foam material for your best comfort.
To install the Seat Cushion and Backrest,
place the seat cushion on top of the black
EVA foam pad on the kayak, with the
backrest facing forward.
There is one long strap on each side of
the backrest. Lead it through the forward
D-ring on the kayak’s side carry handle.
Pull the strap back and go through the
plastic adjustable clip on each side of the
backrest as shown here. Make sure the
threaded sides on the clip is in touch with
the strap.
Now you can also adjust the backrest
from the front. Again, we recommend a
more upright sitting position. It is more
comfortable and will give you more leg
room in the kayak.
A completed Seat Cushion and Backrest.
Connect the hooks on the straps on the
back of the seat to the black plastic D-rings
behind the seat. These straps will keep
the backrest erect.
After both hooks are connected, pull the
ends of the straps back to the best angle
you like. DO NOT OVER-TIGHTEN, or
it may rip the fabric. We recommend a
more upright sitting position for long-time
comfortable paddling.
