23
24
SPRAY COVER
Convert your sit-on-top Airis
®
Kayak into a sit-inside model with the addition of the Spray
Cover. Waterproof and UV resistant, the Spray Cover will keep you dry from drips and
splashes, and protect you from the sun’s harmful rays. One size fits all Airis
®
Kayaks
(except Tandem and Angler models), it is available in yellow.
To install the Spray Cover, first remove the
hooks of the back straps from the D-rings.
You don’t need to completely remove the
seat and backrest. Just those 2 hooks to
clear the splash guard around the seat.
To install the Spray Cover, first remove the
hooks of the back straps from the D-rings.
You don’t need to completely remove the
seat and backrest. Just those 2 hooks to
clear the splash guard around the seat.
Slowly pull the back end of the Spray
Cover towards the rear, keeping the
bungee cord under the splash guard.
Slowly pull the back end of the Spray
Cover towards the rear, keeping the
bungee cord under the splash guard.
This is how it looks after it is properly set
up.
After the Spray Cover is installed, if you
need to enter the kayak, follow these
steps. First open the Velcro straps on
both sides of the Spray Cover near the
seat.
After you are happy with the fit, re-attach
the hooks on the back of the seat to the
rear D-rings.
See the chapter of Seat Attachment for
details on how to install the Seat and
Backrest.
Loosening the straps before removing the
hooks will make un-hooking a lot easier.
NOTICE
