Page 19
entering and changing the temperature
adjustment security code...
From the home screen press the (mode) key until the temperature limit
screen is displayed:
The current fluid temperature is displayed in the top left-hand corner of the
screen. The current set limit temperature is displayed in the top right-hand
corner of the screen.
Press and then the following screen will then be displayed:
The code is factory set at 1234. To enter the code press the key once, the
key twice, the key 3 times and then press the key four times. Press
the key to confirm you have entered the code. If the code was incorrect
the following screen will be displayed
Press the key to re-enter the code or the key to skip and return to the
home screen.
If the code was correct the following screen will be displayed: press the
key to retry or the key to cancel and return to the home screen.
