RULES
MODELS: BUX BM
2
and BUX BP
2
3
Position the magnet so the load remains level.
7
ALWAYS STAY
CLEAR OF THE LOAD.
Guide the load by pushing or pulling the edges.
This keeps your entire body clear of the load at all
times. DO NOT guide the load by pushing or pulling the
Magnet. NEVER get in a position where you could get
hit with load if it dropped.
4
This magnet can be operated from
the controls located on the front r..��?A-<"'-
panel of the magnet or the
Remote Control unit when
its lens is pointed towards
the control panel on the magnet.
To energize the magnet, push
the
"LIFT"
button. The alarm will
sound and the red
DANGER
P----..
lamp will light while the magnetic energy builds up. When
the magnetic energy builds up to a sufficient level, the
alarm will stop sounding. The indicator lamps will now
show the battery charge level. This might take a few
seconds.
IF THE ALARM CONTINUES SOUNDING, OR
THE RED DANGER LAMP STAYS ON, DO NOT OPER
ATE THE MAGNET. TURN THE MAGNET OFF.
8
Carefully set the load down. To release the load, press
the "RELEASE" button on the Front Panel or push
both "RELEASE" buttons on the Remote Control at
the same time by using both thumbs. Then lift the
magnet slightly to be sure the load has been released.
ACAUTION
NEVER
re-energize the magnet until it has been placed in contact with the load to
be lifted. Prematurely energizing the magnet could cause unwanted materials to
be attracted to the magnet.
PERSONAL INJURY MAY RESULT.
O.S. Walker Inc., Battery Powered Magnets
11
