MAINTENANCE
OM 0182SB-A
20
L
UBRICATION
Use a good grease gun and lubricate as follows:
DESCRIPTION
INTERVAL
LUBRICATION REQUIRED
Driveline
8 hours
Grease each universal joint
24 hours
Separate the sliding parts and cover each one of
them with grease
Driving chain
4 hours
and after each operation Lubricate with chain saw lubricant
Auger
24 hours of operation
or once a year whichever
comes first
Grease fitting on each auger section
Gearbox
every month
Check oil level. If needed, add AGMA 5EP
extreme pressure oil, SAE 80W90 gear oil or
equivalent.
