10
Assembly Instructions
5. Attach the lift lever to the carrier frame and
tighten hardware as shown in
Install Lift Lever
photo and
Install Lift Lever Compression
Spring
photo so that 2 - 3 threads protrude
through the ESNA nut.
Place Over
Pivot Stud
Install Bolt
and Washer
Install Lift Lever
Install Spring
and ESNA Nut
Friction Washer
P/N 5141-5
(Not Visible)
Install Lift Lever Compression Spring
ATTACH DETHATCHER TO DECK
1. Select a smooth, flat surface such as a driveway,
sidewalk, garage floor, etc. It is a simple proce-
dure for attachment, with no tools required.
2. Hook the rear legs of the dethatcher under the
front of the deck carrier frame as shown in
Attach Dethatcher to Deck Carrier Frame
,
and slide the channel mounts out to the deck
carrier frame arms.
Rear Leg Hooked on
Deck Carrier Frame
Slide Channel Mount
out to Carrier Frame
Attach Dethatcher to Deck Carrier Frame
3. Once the channel mounts are attached to the car-
rier frame arms, install the lock pins as shown in
Install Lock Pins to Channel Mounts
photo.
The dethatcher should be centered between the
carrier frame of the deck.
Install Lock
Pin
Install Lock Pins to Channel Mounts
4. To remove the dethatcher, reverse the installation
process.
