A16
Maintenance
13
Maintenance
CLEANING THE STRAINERS
Clean the strainers if you notice impeded perfor-
mance or before storage.
Spray Boom Tip Strainers
1. For each spray nozzle, remove the Cap Nut,
the Spray Tip, and the Tip Strainer from the
hose assembly.
2. Wash Tip Strainer and Spray Tip under a
faucet.
3. Reassemble and install.
Tip Strainer
Sump Strainer
1. Remove Tank Cap.
2. Lift the suction hose and unscrew the Sump
Strainer.
3. Wash the Sump Strainer under a faucet and
reinstall.
Sump Strainer
Spray Wand Tip
1. Unscrewed the Spray Wand Tip from the spray
wand.
2. Wash the tip under a faucet and reinstall.
Spray Wand Tip
STORAGE OF THE SPRAYER
Follow this procedure before storing the sprayer for
an extended period of time.
1. Remove and store the Wind Screen.
2. Clean the sprayer and rinse with clean water.
3. Operate the unit until all water is out of the
system.
4. Follow the steps on
5. Disconnect the Wire Harness from the pump.
The harness can be left on the deck and
tucked out of the way, or it can be removed if a
different deck or implement will be installed.
6. Store the unit dry. It is best to protect the
sprayer from freezing weather if possible.