background image

English

   - 5 -

Licence Noti

fi

 cation (optional)

Manufactured under license from Dolby Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Connection to a Television Distribution System (Cable TV etc.) from Tuner

Device connected to the protective earthing of the building installation through the mains connection or through 
other apparatus with a connection to protective earthing-and to a television distribution system using coaxial 
cable, may in some circumstances create a 

fi

 re hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical 
isolation below a certain frequency range (galvanic isolator, see EN 60728-11).

Environmental Information 

This television is designed to consume less energy to save environment. You not only help to save the 

• 

environment but also you can save money by reducing electricity bills thanks to the energy ef

fi

 ciency feauture 

of this TV. To reduce energy consumption, you should take the following steps:
You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On, 

• 

the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. 
Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.

When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce 

• 

energy consumption. 
Disconnect the TV from the mains socket when it will not be used for prolonged periods.

• 

Note that annually, using the TV set in Power Save Mode has more power ef

fi

 ciency than disconnecting 

• 

the TV from the mains plug instead of keeping stand-by mode. Therefore disconnect the TV from the mains 
plug to save energy when you do not use. However it is highly recommended to activate Power Save Mode 
setting to reduce your annual power consumption.
Please helps us to save environment by following these steps.

• 

Repair Information

Please refer all servicing to quali

fi

 ed personnel. Only quali

fi

 ed personnel must repair the TV. Please contact 

your local dealer, where you have purchased this TV for further information.

Summary of Contents for Saorview WP19LEDVD












































Reviews: