Walker SaorView WP24LEDVD, Operating Instructions Manual

English

   - 11 -

 To Switch the TV Off

  Switch the “

• 

” button to position 2 as illustrated, 

 so the TV will switch 

OFF

.

  To power down the TV completely, unplug the power 

• 

cord from the mains socket. 

Note

: When the TV is switched to standby mode, 

standby LED can blink to indicate that features such 
as Standby Search, Over Air Download or Timer is 
active. 

Input Selection

Once you have connected external systems to 
your TV, you can switch to different input sources. 
Press 

“SOURCE”

 button on your remote control 

consecutively for directly changing sources.

Note

: YPbPr mode can be used only when you 

connect a device that has a YPbPr output through the 
PC input with YPbPr to PC cable (not supplied).

Basic Operations

 You can operate your TV using both the remote 
control and onset buttons. 

Operation with the Buttons on the TV

Main menu OSD cannot be displayed via control 
buttons. “

+/-

” buttons will function as volume up/down 

as default. Even if you set other functions for these 
buttons, “

+/-

” buttons will perform as default after a 

short while.

Volume Setting

Press “

• 

P/V/AV

” button once and then use “

+/-

” 

buttons to increase or decrease volume, so a volume 
level scale (slider) will be displayed on the screen.
While Tv is on, +/- button can use as or 
volume - as default.

Programme Selection

Press “

• 

P/V/AV

” button once and then use “

+/-

” buttons 

to change channel. By pressing “

+/-

” button,you can  

select the next or previous programme.

AV Mode

Hold the “

• 

P/V/AV

” button, source OSD will be displayed 

in a few second. 

Operation with the Remote Control

The remote control of your TV is designed to control 

• 

all the functions of the model you selected. The 
functions will be described in accordance with the 
menu system of your TV.

Volume Setting

Press “

• 

V

” button to increase the volume. Press “

V

” button to decrease the volume. A volume level 

scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next 
Programme)

Press “

• 

CH

” button to select the previous 

programme. 
P r e s s   “

• 

C H

”   b u t t o n   t o   s e l e c t   t h e   n e x t 

programme.

Programme Selection (Direct Access)

Press numeric buttons on the remote control to select 

• 

programmes between 0 and 9. The TV will switch 
to the selected programme. To select programmes 
between, press the numeric buttons consecutively. 
When the pressing time is due for the second 
numeric button, only the 

fi

 rst digit programme will 

be displayed.  Press directly the programme number 
to reselect single digit programmes.

Viewing Electronic Programme 
Guide (EPG)

You can view the electronic programme guide (EPG) 
to view information about available programmes.To 
view the EPG menu please press 

EPG

 button on the 

remote control.

Press “

• 

”/“ ”  buttons to navigate through channels.

Press “

• 

”/“ ” buttons to navigate through the 

programme list.
EPG menu displays available information on all 

• 

channels.
Please note that event information is updated 

• 

automatically. If there are no event information 
data available for channels, EPG will be displayed 
with blanks.

01_MB60_[GB]_(01-TV)_woypbpr_1910UK_IDTV_NICKEL16_24940LED_10075239_50199287.indd   11

01_MB60_[GB]_(01-TV)_woypbpr_1910UK_IDTV_NICKEL16_24940LED_10075239_50199287.indd   11

20.09.2011   16:36:45

20.09.2011   16:36:45