Walker SaorView WP24LEDVD, Operating Instructions Manual

English   

- 37 -

Preferences

DEFAULT

If you choose RESET and press OK, the factory-
presets are loaded. Parental level and parental 
password does not change.

DOWNMIX

This mode can be selected when the digital audio 
output of the TV is used. 

SURROUND: Surround sound output.
STEREO: Two channels stereo.
PARENTAL (Parental Level)

Playing some DVDs can be limited depending on the 
age of users. The “Parental Control” function allows 
playback limitation level to be set by the parent.
Parental Level can be adjusted to one of the eight 
levels. Level “8 ADULT” adjustment let you watch all of 
the DVD titles ignoring the DVD disc’s parental level. 
You can watch the DVD discs, which has the same or 
lower parental level than the player’s level only.

PASSWORD (Change Password):

Using this item you can change the current 
password. 
To change the password you will be prompted to 
enter your old password. After you have entered 
your old password, you can now enter the new 4-digit 
password.
You can use C key to delete the incorrect entry.

Note: Factory preset of the password is “0000”. You 
have to enter XXXX digital password every time you 
want to change the parental level. If you forget your 
password please contact technical service.

SPDIF OUTPUT

You can set Spdif Output as PCM or RAW. If you select 
PCM from SPDIF Output in DVD menu and play DVD 
with Dolby audio, you can get audio output with two 
channels via the speakers and the SPDIF Out. If you 
select RAW from SPDIF Output in DVD menu and play 
DVD with Dolby audio, speakers will be muted and you 
can get 5+1 Dolby audio via the SPDIF Out.

Troubleshooting

The picture quality is poor (DVD)

• Make sure the DVD disc surface is not damaged. 

(Scratch, 

fi

 ngerprint etc.)

• Clean the DVD disc and try again. 

See instructions described in “Notes on Discs” to clean 
your disc properly.

• Ensure that the DVD disc is in the drawer with the 

label uppermost.

• A damp DVD disc or condensation may effect the 

equipment. Wait for 1 to 2 hours in Stand-by to dry 
the equipment.

Disc does not play

• No disc in the machine.

 Place a disc into the loader.

• Disc incorrectly loaded.

Ensure that the DVD disc is in the drawer with the 
label uppermost.

• Wrong type of disc. The machine cannot play CD-

ROMS etc.

• The region code of the DVD must match the 

player.

Wrong OSD language

• Select the language in the set-up menu.
• The language for the sound or subtitles on a DVD 

cannot be changed.

• Multilingual sound and/or subtitles not recorded on 

the DVD.

• Try to change the sound or subtitles using DVD’s title 

menu. Some DVD’s do not allow the user to change 
these settings without using the disc’s menu.

• These functions are not available on the DVD.

01_MB60_[GB]_(02-DVD)_WDIVX_1910UK_10075239_50199287.indd   37

01_MB60_[GB]_(02-DVD)_WDIVX_1910UK_10075239_50199287.indd   37

20.09.2011   16:34:48

20.09.2011   16:34:48