background image

English

   - 4 -

Batteries,  including  those  which  are  heavy  metal 

• 

free,  should  not  be  disposed  of  with  household 

waste.  Please  dispose  of  used  batteries  in  an 

environmentally friendly manner. Find out about the 

legal regulations which apply in your area. 
Do not try to recharge batteries, there is a danger 

• 

of explosion. Replace batteries only with the same 

or equivalent type.

This symbol on the product or on its packaging means 

that your electrical and electronic device 

should  be  disposed  at  the  end  of  its 

service  life  separately  from  your 

household wastes. There are separate 

collection systems for recycling in the EU. 

For more information, please contact the 

local authority or the dealer where you 

purchased the product.

Disconnecting the Device

The  mains  plug  is  used  to  disconnect  the TV  set 

from the mains and therefore it must remain readily 

operable.

Headphone Volume

Excessive sound pressure from earphones 

and headphones can cause hearing loss.

Installation

To  prevent  injury,  this  device  must  be  securely 

attached to the wall in accordance with the installation 

instructions when mounted to the wall (if the option 

is available).

LCD Screen

The LCD panel is a very high technology product with 

about a million thin film transistors, giving you fine 

picture details. Occasionally, a few non-active pixels 

may appear on the screen as a fixed blue, green or 

red point. Please note that this does not affect the 

performance of your product.
Warning! Do not leave your TV in standby or operating 

mode when you leave your house.

Connection to a Television Distribution 

System (Cable TV etc.) from Tuner

Device  connected  to  the  protective  earthing  of  the 

building installation through the mains connection or 

through other apparatus with a connection to protective 

earthing-and to a television distribution system using 

coaxial cable, may in some circumstances create a 

fire hazard.

Connection  to  a  cable  distribution  system  has 

therefore to be provided through a device providing 

electrical isolation below a certain frequency range 

(galvanic isolator, see EN 60728-11).

The  Standby  Off/On  button  doesn´t  separate  this 

device completely from mains. Moreover the device 

consumes power in the standby operation. In order to 

separate the device completely from mains, the mains 

plug has to be pulled from the mains socket. Because 

of that the device should be set up in a way, that an 

unobstructed access to mains socket is guaranteed, 

so that in case of emergency the mains plug can be 

pulled immediately. To exclude the danger of fire, the 

power cord should principally be separated from the 

mains socket prior to a longer period of non-usage, 

i.e. during vacations.

Electrical device not in the hands of children

Never  let  children  use  any  electrical  device 

unsupervised.  Children  cannot  always  recognise 

possible  dangers.  Batteries  /  accumulators  can  be 

life threatening when swallowed. Store batteries out 

of the reach of small children. In case of swallowing 

a battery medical aid has to be sought immediately. 

Also keep the packaging foils away from children as 

there is danger of suffocation.

Licence Notification (optional)

Manufactured  under  license  from  Dolby 

Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of 

Dolby Laboratories.

Summary of Contents for SaorView WP3882S






































Reviews: