background image

English

   - 7 -

Note

: Lip Sync delay may occur during the timeshifting. 

Radio record is supported. The TV can record 

programmes up to ten hours.
Recorded programmes are split into 4GB partitions. 
If the writing speed of the connected USB disk is not 

sufficient, the recording may fail and the timeshifting 

feature may not be available.
It is recommended to use USB hard disk drives for 

recording HD programmes.
Do not plug out the USB/HDD during a recording. This 

may harm the connected USB/HDD.
Multipartition support is available. The maximum of 

two different partitions are supported. The first partition 

of the USB disk is used for PVR ready features. It also 

must be formatted as the primary partition to be used 

for the PVR ready features.
Some stream packets may not be recorded because 

of signal problems, so sometimes video may freezes 

during playback. 
Record, Play, Pause, Display (for PlayListDialog) 

keys can not be used when teletext is ON. If a 

recording starts from timer when teletext is ON, 

teletext is automatically turned off. Also teletext usage 

is disabled when there is an ongoing recording or 

playback. 

Timeshift Recording 

Press 

 

(PAUSE) button while watching a broadcast 

to activate timeshifting mode. In timeshifting mode, 

the programme is paused and simultaneously 

recorded to the connected USB disk.
Press   (PLAY) button again to resume the paused 

programme from where you stopped.

Note: Timeshift cannot be used while in radio mode.

Instant Recording

Press 

 (RECORD) button to start recording an 

event instantly while watching a programme. You can 

press 

 (RECORD) button on the remote control 

again to record the next event on the EPG. In this 

case, an OSD will be displayed, indicating the 

programmed events for recording. Press   (STOP) 

button to cancel instant recording. 

Note

: You can not switch broadcasts or view the Media Browser 

during the recording mode. While recording a programme or 

during the timeshifting, a warning message appears on the 

screen if your USB device speed is not sufficient.

Watching Recorded Programmes 

Select the 

Recordings Library

 from the 

Media 

Browse

r menu. Select a recorded item from the list (if 

previously recorded). Press the 

OK

 button to view the  

Play Options

. Select an option then press 

OK

 button.

Note: Viewing main menu and menu items will not be available 

during the playback.

Press the   (STOP) button to stop a playback and 

return to the Recordings Library.

Slow Forward

If you press   (PAUSE) button while watching 

recorded programmes, the slow forward feature will 

be available. You can use 

 button to slow forward. 

Pressing 

 button consecutively will change slow 

forwarding speed.

Recording Configuration

Select the Recording Configuration item in the 

Settings menu to configure the recording settings. 

Format Disk

: You can use Format Disk feature for 

formatting the connected USB disk. 

IMPORTANT

: Note that ALL the data stored on the 

USB disk will be lost and the disk format will be 

converted to FAT32 if you activate this feature. If 

your USB disk malfunctions, you can try formatting 

the USB disk. In most cases formatting the USB disk 

will restore normal operation; however, ALL the data 

stored on the USB disk will be lost in such a case. 

Note: 

If “USB is too slow” message is displayed on the 

screen while starting a recording, try restarting the recording. 

If you still get the same error, it is possible that your USB 

disk does not meet the speed requirements. Try connecting 

another USB disk.

Media Browser Menu

You can play photo, music, and movie files stored on a 

USB disk by connecting it to your TV. Connect a USB 

disk to one of the USB inputs located on the side of 

the TV. Pressing the 

MENU

 button while in the Media 

Browser mode will access the Picture, Sound and 

Settings menu options. Pressing the 

MENU

 button 

again will exit from this screen.

 

You can set your Media 

Browser preferences by using the Settings Menu.

Loop/Shuffle Mode Operation

Start playback with   and 
activate  

TV plays next file and loop 

the list.

Start playback with OK and 
activate  

the same file will be played in a 

loop (repeat).

Start playback with OK/  and 
activate  

the file will be played in a shuffle.

Quick Menu

The Quick Settings menu allows you to access some 

options quickly. This menu includes 

Power Save Mode, 

Picture Mode, Equalizer Settings, Favourites 

and 

Sleep Timer 

options. Press 

Q.MENU

 button on the 

remote control to view the quick menu. See the following 

chapters for details of the listed features. 

Summary of Contents for WP2413LEDVD






















Reviews: