background image

English   

- 11 -

  Connecting to a DVD Player 

 If you want to connect a DVD player to your LCD 
TV, you can use connectors of the TV set. DVD 
players may have different connectors. Please refer 
to your DVD player’s instruction book for additional 
information. Power off both the TV and the device 
before making any connections. 

 Note

: Cables shown in the illustration are not supplied. 

 • If your DVD player has an HDMI socket, you can 

connect via HDMI. When you connect to DVD player 
as illustrated below, switch to HDMI source. See, 
“Input Selection” section.

• Most DVD players are connected through 

COMPONENT SOCKETS. Use a component video 
cable to connect video input. For enabling audio, use 
a component audio cable as illustrated below. When 
the connection is made, switch to 

YPbPr

 source. 

See, “Input selection” section.

• You may also connect through the SCART 1 or 

SCART 2. Use a SCART cable as shown below.

 

  

Note

 : These three methods of connection perform the same 

function but in different levels of quality. It is not necessary 
to connect by all three methods. 

    

 

HDMI

inputs

Scart  sockets

Component 

video

inputs

Component 

audio

inputs

DVD  Player

 

   Using Side AV Connectors 

 You can connect a range of optional equipment 
to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are 
not supplied. 
  • For connecting a camcorder, connect to the  VIDEO 

IN socket and the AUDIO SOCKETS.  Do not connect 
the camcoder to  VIDEO IN socket at the same time 
since it can cause noise in the picture. For selecting 
the related source, see the section “Input selection” 
in the following parts. 

• To listen  to the TV sound from headphones, connect 

to the HEADPHONE jack of theTV. 

Camcorder

Headphone

     Connecting Other Equipment 
via Scart

  Most devices support SCART connection. You can 
connect a; DVD recorder, a VCR or a decoder to your 
LCD TV by using the SCART sockets. Note that cables 
shown in the illustration are not supplied. 
Power off both the TV and the devices before making 
any connections.
For more information, refer to your device’s own 
instruction book. 

  

Scart  sockets

Decoder

DVD  Recorder

Video  Recorder

 

[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_32843W_1205UK_10069999_50176032.indd   11

[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_32843W_1205UK_10069999_50176032.indd   11

06.09.2010   09:12:08

06.09.2010   09:12:08

Summary of Contents for WP3211LCD








































Reviews: