English
- 19 -
Input Selection
Once you have connected external systems
to your TV, you can switch to different input
sources.
• Press “
” button on your remote control for
directly changing sources.
or,
• Select the option “
Source
” from the main menu
by using the “ ” or “ ” buttons. Use then the “ ” or
“ ” buttons to highlight an input and press the
“ ” button to select it.
Note
: You can mark desired source options by
pressing the
OK
button. Therefore, when
“
AV/
SOURCE
”
button is pressed, only the marked source
options will be available (except for the TV source).
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press the “
” button to decrease the
volume or the
button to the increase
volume, so a volume level scale (slider) will
be displayed on the screen.
Programme Selection
• Press the “
P/CH +
” button to select the next
programme or the “
P/CH -
” button to select the
previous programme.
Viewing Main Menu
• Press “
” / “
” buttons at the same
time to view main menu. In the Main menu,
select sub-menu using “
P/CH -
” or “
P/CH +
”
buttons and enter the sub-menu using the “
” or “
” buttons. To learn the usage
of the menus, refer to the menu system
sections.
AV Mode
• Press the “
TV/AV
” button in the control panel
on the TV to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed
to control all the functions of the model you
selected. The functions will be described in
accordance with the menu system of your
TV.
• Functions of the menu system are described
in the following sections.
Volume Setting
• Press the “
V+
” button to increase the volume.
Press the “
V-”
button to decrease the volume.
A volume level scale (slider) will be displayed
on the screen.
Programme Selection (Previous or Next
Programme)
• Press the “
P -
” button to select the previous
programme.
• Press the “
P +
” button to select the next
programme.
Programme Selection (Direct Access)
• Press the numeric buttons on the remote
control to select programmes between 0
and 9. The TV will switch to the selected
programme. To select programmes between
10 - 299 (for IDTV) or 10-199 (for analogue),
press the numeric buttons consecutively (e.g.
for programme 27,
rst press 2 and then 7).
When the pressing time is due for the second
numeric button, only the
rst digit programme
will be displayed. The limit of the delay time
is 3 seconds.
• Press directly the programme number to
reselect single digit programmes.
[GB]_MB36_HDIDTV_MPEG4_BRONZE8_32880W_1205UK_10063234_50151599.indd 19
29.07.2009 16:03:06
