background image

English   

- 21 -

button.When 

 nished,  press  the 

OK

  or 

RED

 

buttons to continue and the following OSD will 
be displayed:

After 

automatic tuning

 is 

 nalized, a programme 

list will appear on the screen. In the programme 
list you will see the programme numbers and 
names assigned to the programmes.
If  you  do  not  accept  the  locations  and/or  the 
names  of  the  programmes,  you  can  change 
them  in  Program  table.  For  details,  see  the 
section “Program table”.

General Operation

Pressing  the  DTV  button  at  any  time  while 
watching  television  programmes,  will  switch 
the  TV  set  to  the  digital  terrestrial  television 
broadcasting.

Information Banner

• Whenever you change the channel using the 

P  +  or  P  -

  buttons  or  the  numeric  buttons, 

the TV  displays  the broadcast picture along 
with  an  information  banner  at  the  bottom  of 
the screen. This will remain on the screen for 
approximately a few seconds. 

• The information banner can also be displayed 

by pressing the 

INFO

 button at any time while 

watching  the  TV.  Pressing  the 

INFO

  button 

again removes the banner.

• The information banner gives information on the 

channel selected and the programme on it.

• The name of the channel is displayed along 

with its channel list number

• The current and next programme information are 

given with the beginning and ending time. 

• The current time information is displayed along 

with channel name.

Hint:  Not  all  channels  broadcast  the  programme 
data. If  the  name  and times of the programme  are 
not available then “No Information” is displayed in the 
information banner.
Note: If the selected channel is locked, you must enter 
the correct four digit key to view the channel. In such 
a situation, a dialog box asking for the lock key will 
be displayed:

Electronic Programme Guide (EPG)

Some,  but  not  all,  channels  send  information 
about the current and next events. Please note 
that event information is updated automatically. 
If there are no event information data available 
for  channels,EPG  will  be  displayed  with 
blanks.
• Press 

GUIDE

 button to view the 

EPG

 menu.

•  Press  the  “ ”  or  “ ”  buttons  to  navigate 
through  channels.
•  Press  the  “ ”  or  “ ”  buttons  to  navigate 
through the programme list. 
• In EPG Menu, you can easily see the extended 
help information by pressing the 

 button.

RED  button  (Shrink):

  makes  the  info  boxes 

smaller.

GREEN  button  (Expand):

  makes  the  info 

boxes larger.

YELLOW  button  (Prev.  Day):

  displays  the 

programmes of previous day.

[GB]_MB36_HDIDTV_MPEG4_BRONZE8_32880W_1205UK_10063234_50151599.indd   21

29.07.2009   16:03:08

Summary of Contents for WP32MP4





















































Reviews: