background image

English   

- 40 -

Select the  

Phase 

 item by using the “ ” or “

”  buttons. Use the “ ” or “ ” buttons to adjust 
the value. 

 Dot Clock 

 Dot Clock adjustments correct the interference 
that appear as vertical banding in dot intensive 
presentations like spreadsheets or paragraphs 
or text in smaller fonts.
Select the  

Dot Clock 

 item by using the “ ” or “

”  buttons. Use the “ ” or “ ” buttons to adjust 

the value. 

 PC Picture Menu 

 For  adjusting  PC  picture  items,  do  the 
following:
Press the “ ” or “ ” buttons to select the second 
icon. PC Picture menu appears on the screen.

Brightness

Contrast,  Colour

  and 

Colour 

Temperature 

settings in this menu are identical 

to  settings  de

 ned  in TV  picture  menu  under 

“Analogue TV Menu System”. 

  

Note

 : If you set Colour Temp as User, you can de

 ne 

R, G, B settings manually. 

 Sound Menu 

 The  items  in  this  menu  are  described  at  the 

Sound  Menu

”  section  explained  in  “

Menu 

System

”. 

 Feature Menu 

 Feature  menu  settings  are  identical  to  the 
settings explained in section “ 

Feature Menu

 ” 

in “ 

Menu System 

”. 

 Source Menu 

 Source  menu  settings  are  identical  to  the 
settings  explained  in  section  “ 

Source  Menu 

” 

in “ 

Menu System

 ”. 

  

 

   Displaying TV Information 

   

Programme  Number

 ,   

Programme  Name

 , 

 

Sound Indicator

  and  

Zoom Mode

  information is 

displayed on the screen when a new programme 
is entered or 

INFO

 button is pressed.   

  Mute Function 

 Press  the  “ ”  button  to  disable  sound.  Mute 
indicator will be displayed in the upper side of 
the screen. 
 To cancel mute, there are two alternatives; the 

 rst  one  is  pressing  the  “ ”  button  and  the 

second one is increasing the volume level.  

  PIP (Picture-in-Picture) and 
PAP (Picture-and-Picture) 
Modes 

 Press the “

” button to switch to PIP mode.

At  PIP  Mode,  a  small  picture  (PIP  picture)  is 
displayed on the main picture. There are 1 size 
and 4 positions (upper left, upper right, bottom 
left  and  bottom  right)  available  for  the  PIP 
window. You can use the “

” button to change 

the PIP position. Aspect Ratio of the PIP window 
is 

 xed and 4:3.

When PIP Mode is entered, the default active 
window is the PIP window and the active window 
is indicated by a red frame around it. The active 
window can be changed by pressing the  “ ” 
or “ ” buttons. The status info OSD belongs to 
active window. The place of the status OSDs 
are same for both windows.
Press  the  “

”  button  again  to  exit  the  PIP 

mode.
Press the “

” button to switch to PAP mode.

At PAP Mode, two pictures with equal sizes are 
displayed on the screen. Aspect Ratios of the 
windows are 

 xed.

When you switch to PAP Mode, main window in 
PIP Mode will be displayed on the right side of 
the screen. The active window can be changed 
by pressing the “ ” or “ ” buttons.
Press  the  “

”  button  again  to  exit  the  PAP 

mode. 

    Picture Mode Selection

 By  pressing   the 

PP

   button,  you  can  change 

 

Picture Mode

  settings in accordance with your 

viewing  requirements. Available  options  are 
Dynamic, Natural, Cinema and Pixellence.  
Note : This function will not be available while 
in PC mode.

  Freezing Picture 

 You  can  freeze  the  picture  on  the  screen  by 
pressing the “ 

OK

 ” button on the remote control. 

Press the “ 

OK

 ” button to freeze picture. Press 

again to quit freeze mode. 

     

[GB]_MB36_HDIDTV_MPEG4_BRONZE8_32880W_1205UK_10063234_50151599.indd   40

29.07.2009   16:03:21

Summary of Contents for WP32MP4





















































Reviews: