- 10 -
TV and Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you also con-
nect a eurocable to
EXTERNAL
sockets (optional).
Playback NTSC (optional)
Connect NTSC VCR player to Euroconnector at the
back of the TV.
Connect NTSC VCR player to RCA Jack at the front of
the TV (optional).
Then, press “
AV
” button to select AV-1 or AV-2 or
F-AV / B-AV, S-VHS (optional).
Copy Facility (optional)
Source selection for
VCR
recording.
• Select Features Menu in the Main Menu.
• Select
AV-2 OUTPUT
source pressing “ ” or “ ”
button.
Camera and Camcorder
To connect to Front-AV input (FAV) (optional):
Connect your camera or camcorder at the front side
of your TV.
• Connect your equipment to the TV via
VIDEO
(yel-
low),
AUDIO R
(red) and
AUDIO L
(white) inputs.
You should connect the jacks to the input in the
same colour.
To connect to Back-AV (BAV) input / output
(optional)
Connect your camera or camcorder at the back side
of your TV.
• Connect your equipment to the TV via
VIDEO
(yel-
low),
AUDIO R
(red) and
AUDIO L
(white) inputs.
You should connect the jacks to the input in the
same colour.
Connecting Headphones (optional)
Use the stereo headphone socket (HP) on the lower
front / right side of your TV, to connect headphones.
Tips
Care of the Screen
Clean the screen with a slightly damp, soft cloth. Do
not use abrasive solvents as they may damage the
TV screen coating layer.
Poor Picture
Have you selected the correct TV system? Is your
TV set or house aerial located too close to the loud-
speakers, non-earthed audio equipment or neon lights,
etc. ?
Mountains or high buildings can cause double pic-
tures or ghost images. Sometimes you can improve
the picture quality by changing the direction of the
aerial.
Is the picture or Teletext unrecognizable? Check if
you have entered the correct frequency.
The picture quality may degrade when two peripher-
als are connected to the TV at the same time. In such
a case, disconnect one of the peripherals.
No Picture
Is the aerial connected properly? Are the plugs con-
nected tightly to the aerial socket? Is the aerial cable
damaged? Are suitable plugs used to connect the
aerial? If you are in doubt, consult your dealer.
No Picture
means that your TV is not receiving any
transmission. Have you pressed the correct keys on
the remote control? Try once more.
Sound
You can not hear any sound. Did you perhaps inter-
rupt the sound, pressing “
MUTE
” key?
Remote Control
Your TV no longer responds to the remote control.
Press the “
TV
” button on the remote control once
more. Perhaps the batteries are exhausted. If so you
can still use the local keys at the front of your TV.
Have you selected the wrong menu? Press “
TV
” key
to return to TV mode or press "
" to return to the
previous menu.
No solution
Switch your TV set off and on. If this does not work,
call the service personnel; never attempt to repair it
yourself.
ENG-2151-1243UK-AK30-T3X-COST.p65
15.10.2008, 15:03
10
