-13-
Quick TV Set-Up Guide
1. If power input is connected correctly, the LED on the front panel becomes
(i.e. stand-by mode). Press the POWER button on the function panel OR press
the red POWER button “
” of the remote control. The TV will switch on and the
LED on the front panel becomes green.
2. To switch the TV off, press the POWER button on the function panel OR press the
red POWER button “
” of the remote control. The TV will switch off and go to the
stand-by mode.
Amber
Turning ON/OFF the TV
PIP
TXT
i
X
?
DVD
MUTE
ALTERNATE/
VIRTUAL
SLEEP
TITLE
PICTURE
SIZE
Auto Scan channels
If you would like the channels on certain numbers please refer to 'Manual scan'
on page 24, or channel swap on page 22.
1. Press the AV key repeatedly to change the input source to TV.
2. Press the MENU/ENTER key on the remote control to show the On
Screen Menu (OSD).
3. Select TV setup with the up / down arrow buttons, then Press Left / Right
arrow buttons to select Auto Search. Then press left arrow again and
"country" will be highlighted. Use the left / right arrow buttons to select
your country. This will only need setting the first time the TV is tuned.
4. When the auto scan has finished Press the MENU/ENTER button to leave the Setup stage.
Press the up / down buttons to highlight "Start Search", then press the
right arrow button to start searching for channels.
3
1
Cursor
keys
2
4
1. Connect adapter to power input of TV.
2. Connect adapter to power cord.
3. Connect the other end of power cord to power supply.
Power connection
POWER
CONNECTING A TV ANTENNA / CABLE
To view television channels correctly,
a signal must be received from one of the following sources:
1. An indoor or outdoor aerial
2. A cable television set top box
Insert the aerial plug into the aerial input socket on the left side of the television.
Note: For receiving over-the-air TV broadcasts, we recommend you use an external
fixed aerial.
If you have to use a set top aerial, please ensure that you use one with sufficient gain to
receive in weak signal areas. Only when you are in close proximity to a transmitter will an
indoor aerial produce a picture as clear as a fixed antenna.
Connecting to An Aerial
75
