11.1 Parameters of GA005 balance charger:
11.2 Features of GA005 balance charger
(1) GA005 utilizes microcomputer chips to monitor and control over the whole charging process in a balanced
way with LED indicator to display the charging status at real time.
(2) Connects to an input power supply (DC 15-18V 1000 mA).
(3) GA005 is suitable for 2-3S (7.4V/ 11.1V) Li-ion or Li-polymer battery pack.
(4) Automatically detects 2-3S Lithium battery. GA005 will automatically charge when it finds the voltage of anyone
cell among the LiPo pack is excessively low. At the same time LED displays as charging status (flash in
red). The voltage of anyone cell LiPo is controlled at the level of 4.2 ± 0.05V to ensure the maximum voltage
difference of single cell in the battery is less than 50 mV.
Weight
62.5
*
47
*
20.8mm
46g
DC15-18V
1000mA
Input voltage
*
800mA
Input current
Output current
Dimension
11.3 Instruction of GA005 balance charger
11.4 Operation steps
Plug the wall adapter into the mains
power supply. Its output end connects
to GA005. Then its LED is lighting in
solid red.
Insert the balanced pin of LiPo
battery into GA005.
During charging, Red LED is
continuously flashing. If saturated,
Red LED becomes solid green
lighting.
17
Input jack
Status LED
Charging jack for
7.4V battery
Charging jack for
11.1V battery
Polarity Assignment
Diagram
12.6V 8.4V 4.2V 0V
11
Instruction
and
attention
of GA005
balance
charger