Factory setting of DEVO F8S stick mode & stick calibration has been determined; please refer to the
following operation method for switching and calibration.
Be sure to switch off the aircraft power or lock motor before operation.
Enter stick
Mode
switch
Exit stick
Mode
switch
Beeping when you exit, indicating calibration fails, please recalibrate.
Long press 3~5 sec
+
1. Left stick at the lowest position
When beeps, enter the
stick mode switch
+
Short press
2. Release left stick (back middle)
1. Left stick at the highest position
Long press 3~5 sec
+
When beeps, confirm and
exit the stick mode switch.
ＭＯＤＥ ２
Rudder
Throttle
Elevator
Aileron
MODE 2 is left-hand throttle
ＭＯＤＥ １
Elevator
Rudder
Throttle
Aileron
MODE 1 is right-hand throttle
Video button
Photo button
Power indicator
Left stick
Long press “ ” for 3~5 sec, you will hear a beep. Enter stick calibration, repeatedly move sticks from
minimum to maximum mechanical range for several times, and then back to the middle.
Long press “ ” for 3~5 sec, when beeps, confirm and exit the stick calibration.
Long press “ ” for 3~5 sec, when “beeps”, Fixed ID is set.
Long press “ ” for 3~5 sec, when “beeps, beeps”, Fixed ID is cleared.
17
Quick Start Guide
Starlight
14.3 Stick Mode Switch, Stick Calibration & Fixed ID
Stick Mode Switch:
Stick Calibration:
Customized Fixed ID of DEVO F8S:
※
Customization also supported in Walkera Drone APP.
MODE 1:
The power indicator flashes once.
MODE 2:
The power indicator flashes twice.
Choose
