14.4 Compass Calibration
The red, blue and black wires of the brushless motors must be soldering to the brushless ESC
according to the illustration.
U
V
W
U
V
W
U
V
W
U
V
W
Head
Place right/left sticks at lowest location, toggle them
inward and keep for 5 seconds until the aircraft’s
Left red LED light extinguishes and right red LED
light flashes.
Horizontal 360°rotation of aircraft until left red LED
light is steady on and right red LED light flashes.
Ground
heading
Tail toward operator
Front
The compass calibration steps are as follows:
Vertical 360°rotation of aircraft (heading down) until
right/left red light is steady on, indicating successful
calibration, and place aircraft at a horizontal location
In case of failure to calibrate, please follow above
procedure to repeat calibration.
Keep for 5 seconds
14.5 Brushless ESC and Brushless Motor connection diagram
Brushless ESC
(blue light)
Brushless ESC
(blue light)
Brushless ESC
(red light)
Brushless ESC
(red light)
Brushless
motor
Brushless
motor
Brushless
motor
Brushless
motor
Calibrate compass when abnormal circle flight or skewing occurs during flight
(motor locked,
light red LED remains on).
Please conduct calibration in an open outdoor area away from electromagnetic interference.
18
Quick Start Guide
Starlight
