Spartan
- 15 -
Exhaust gas is hot. Always ensure that there is nothing that is susceptible to heat damage within 200 mm (8") of the
effective area of the exhaust gases (e.g. ropes, fenders or the side of another boat). All lead-through's raise the
temperature of their surroundings. A wooden deck, in particular, may dry due to the heat. Remember that the surface of
the lead-through is hot during use.
Singular exhaust hose 1028 with a length of more than 2 meters (7') has to be equipped with a drainage lock 602293
(condense water) located to the lowest point of the tube. With coaxial exhaust hose 2045 drill app. 2 mm (3/32") hole to
the lead-through or to the exhaust pipe to get the water out.
The Exhaust gas pipe must be made of stainless steel. If necessary, seal the connections between the exhaust gas
pipe and the lead-through with heat-resistant silicone. When installing the lead-through to the stern side or to otherwise
leaning position, be sure that the water do not stuck the exhaust.
Summary of Contents for Spartan
