background image

wallee.com        

PAX A920Pro wallee | Manual T6.2.EN-210730-01 | 3

Setup

The 

initial setup and installation 

of your new PAX A920 wallee is very simple. In just a few 

steps, your device is ready to handle your payment transactions. If you have any questions 
during setup, our support team will be happy to help.

1. Insert the paper roll

First open the paper roll compartment on the back of the ma-
chine. Pull the tab on the top of the machine. Place the paper 
roll in the tray so that the front of the paper comes out the 
bottom of the roll and leave about 1 cm overhang. Close the 
tray. Paper roll dimensions: 

57mm width, max. 40mm diameter.

2. Charging the device

Before using the unit for the first time, it should be fully char

-

ged. To do this you can charge the terminal directly via the USB 
cable supplied. Use the the USB-C port on the left side of the 
unit (8). We recommend using the charging station.

3. Switching the device on / off

Press and hold the Power On/Off button (6) for 2 seconds. To 
switch the unit off again, press the same button until you see a 
button until you see a selection menu with four options (Flight 
mode, Silent mode, Restart, Power off) and select the option 
and select the option „Power off“.

4. Set up Wi-Fi

®

 / WLAN

Once your device is fully charged and switched on, you must 

first 

set up your Wi-Fi

®

 connection before you can you can 

enter the activation code

 (step 5). 

•  Select the 

menu icon

 

dehaze

 in the upper left corner

•  Select 

„Device settings“

 

phonelink_setup

 and enter your merchant 

password if necessary

•  Select 

„Configuration WiFi“

 

wifi

•  Select your Wi-Fi

®

 / WLAN network, enter the password 

of your of your network and confirm

•  Once you are connected to your WLAN, return to the 

start screen and return to the home screen and 
continue with the activation of your account (step 5).

4G data connection 

OPTIONAL

If you have chosen the PAX A920Pro wallee with SIM card,  
you can also use the mobile data connection for activati-
on. The SIM card is pre-installed when you switch on the 
device and is ready for use immediately.

Delivery contents

Device 
PAX A920Pro wallee

A cable 
USB-C / USB 

Charging base 
L920-BC 

Setup 
paper roll

Reviews: