Safety
WX520, WX520L, WX520T
Trailer Wood Splitter
Safety
12
2.11 Being Prepared
•
Determine where the split wood is going to be piled ahead
of time. Make sure it does not interfere with safe loading of
wood into the splitter.
•
Precut logs so wood is ready to load into the splitter. Do not
run a chain saw and the splitter at the same time.
•
Determine a safe work area location:
-
Area must be clear of stones, branches or hidden
obstacles that might cause a tripping, hooking or
snagging hazard.
-
Ground should be firm and level.
•
Operate only in daylight or good artificial light.
•
Make sure machine is properly adjusted and in good
operating condition.
•
Store fuel well away from the wood pile.
•
Perform the
Pre-operation Checklist
procedure before
starting work (see
Pre-operation Checklist on page 34)
.
•
Do not operate on hillsides or when working area is
cluttered, wet, muddy or icy to prevent slipping and
tripping. Operate only on level ground.
•
Position machine so prevailing winds blow engine exhaust
fumes away from operator's station.
•
Do not operate machine inside a closed building to prevent
asphyxiation from engine exhaust.
•
Stop engine when leaving the machine unattended.
Summary of Contents for 250754
Page 42: ...www wallensteinequipment com...
