SQ500 Universal Quick-Attach Plate
3039A660
Tieback Mount
9
01674
Install a Quick-Attach Plate on a Backhoe
IMPORTANT! Stabilize the backhoe to prevent movement
during installation.
Quick-attach plate item numbers are in brackets and defined
under
SQ500 Universal Quick-Attach Plate Parts on page 8
For clarity, some backhoe parts are not shown in the following
image.
Tools Required
•
Basic shop tools.
•
One calibrated torque wrench with 1
–
1/16" socket.
•
One 1
–
1/16" open-end wrench.
•
One socket wrench with 1
–
1/16" socket.
Step 1
Align the pivot-backhoe weldment (12) with the backhoe main
frame (for information about the location of backhoe parts, see
the backhoe Operator's Manual).
Step 2
Install the eight 5/8" NC bolts (not shown) and lock nuts (not
shown); four on each side.
Step 3
Use a calibrated torque wrench to tighten the eight lock nuts to
160 lbf•ft
(
215 N•m
).
Step 4
Install the two turnbuckle clevises (3) and toplinks (5). For
instructions, see
Install the Toplink Assemblies on page 10
Fig. 3 –
Universal Quick-Attach Plate Installation
Summary of Contents for 3039A660
Page 1: ...Rev Jul 2022 Tieback Mount INSTALLATION INSTRUCTIONS 3039A660 ...
Page 15: ......
Page 16: ...WallensteinEquipment com ...
