8
3652A300 Installation Instructions
18.
Carefully use the backhoe hydraulics to raise the bracket
assembly into the bottom of the hooks for positive
attachment.
19.
Carefully use the backhoe hydraulics to rotate the bracket
assembly into the top attach points on the subframe. Rotate
the bracket until it reaches the stop. The pin holes will then
be aligned.
Generic illustration showing hitching principal.
Bottom
Attach Point
Universal
Pins
Top Attach
Point
2
1
20.
Insert the two welded universal pins into the pin holes and
secure with lynch pins.
21.
Check that all attach points are secure, and make sure all
bolts / nuts are tightened and torqued.
22.
Test the hydraulics: lift the stabilizer legs and remove the
skid. Lower the stabilizers and test all boom functions.
23.
Check that all moving parts have clearance and do not
interfere with the subframe.
The subframe installation is now complete.
Completed 4 Point
Subframe installation
