3
3684A050 Installation Instructions
Safety Rules
WARNING!
ATTENTION! BE ALERT! YOUR SAFETY IS
INVOLVED!
Working around equipment can be dangerous.
Always be aware of bystanders, the area
around the machine, and what to do in case of
emergency.
Learn how to install and operate the new
equipment safely. Read and understand these
instructions before attempting installation.
W007
WARNING!
Before operating the backhoe:
• Check that all pins and adapter plates are
secure and correctly attached to the sub-
frame.
• Ensure that all fasteners are correctly
torqued according to the bolt torque table.
• Inspect and test all hydraulic connections.
• Thoroughly read the backhoe operator's
manual for safe operation.
W008
WARNING!
Make sure the sub-frame, backhoe and tractor
are positioned on dry, level ground. The area
around them should be clear and free of debris.
Make sure the tractor is shut off, the brake is
applied, and key is removed.
WARNING!
Review and understand the operating
instructions for the backhoe. Part of the
installation process includes operating the
hydraulics to position the attachment points on
the tractor.
WARNING!
Proceed with caution. During the course of
assembly, the ROPS / cab support bolts are
removed. Support for the cab may be required
when removing cab mounting bolts. Remove and
replace bolts one side at a time.
1. Do not install backhoe and required counterweights on
tractor if the total tractor and equipment weight exceeds
the tractor ROPS weight certification.
2. Make sure equipment is properly mounted, adjusted and
in good operating condition.
3. Make sure that all safety shielding and safety signs are
properly installed and in good condition.
