background image

WXR720/L, WXR740/L

Trailer Wood Splitter

Introduction

7

1.5  Decal Information

When getting familiar with the Wallenstein product, 

notice that there are numerous decals located on the 

machine. There are different types of decals for safety, 

information, and product identification. The following 

section explains what they are for and how to read 

them. 

Safety Decals

 are pictorial with a yellow background 

and generally two panel. The top panel shows the 

safety alert (the potential hazard) and the bottom panel 

shows the message (how to avoid the hazard).

Safety alert 

Message

Safety Notice Decals

 are pictorial with a blue 

background and generally rectangular with single or 

multiple symbols. This decal informs what Personal 

Protective Equipment is required for safe operation. 

Informative Decals

 are generally pictorial with a white 

background and can vary in the number of panels. This 

type of decal explains the operation of a control. 

Product Decals

 indicate machine model and serial 

number, and other important information.

VIN/

NLV:

MODEL: ##########

#########

Manufactured by:

 Wallenstein Equipment Inc., 7201 Line 86, Wallenstein ON N0B2S0, Canada

TYPE OF VEHICLE/TYPE DE VEHICLE:

TRA / REM

GAWR/PNBE (KG): GVWR/PNBV (KG):

###

DIMENSION- RIM/JANTE

/

E

R

I

T

 :

PNEU:

COLD INFL. PRESS/PRESS DE

CONFLA A FROID (PSI/LPC):

THIS VEHICLE CONFORMS TO ALL APPLICABLE STANDARDS

PRESCRIBED UNDER THE CANADIAN MOTOR SAFTEY REGULATIONS

IN EFFECT ON THE DATE OF MANUFACTURE / CE VEHICLE EST

CONFORME A TOUTES LES NORMES QUI LUI SONT APPLICABLES EN

VERTU DU REGLEMENT SUR LA SECURITE DES VEHICLES

AUTOMOBILES DU CANADA EN VIGUEUR A LA DATE DE SA FABRICATION.

###

###

###

###

Maintenance Decals

 have a green background and 

can vary to the number of panels. This decal shows a 

type maintenance required and frequency interval. 

See the section on safety signs for safety decal 

definitions. For a complete illustration of decals and 

decal locations, download the parts manual for your 

model product at 

www.wallensteinequipment.com.

Summary of Contents for 720123













































Reviews: