BX36S
3PH Self-feed Chipper
Transporting
31
• Do not exceed a safe travel speed.
• Always follow and obey applicable highway
rules and regulations.
• Be sure all lights, markers and SMV sign
required by the traffic regulations are in place,
clean and working.
• Check 3 point hitch connections and ensure
they are safely pinned with retainers.
• Never allow riders on the machine.
• Do not drink and drive.
• Avoid rough terrain. Slow down when
encountering rough conditions or cornering.
• Stow and secure feed table before moving or
transporting.
13.1 Prepare for transport
When transporting the machine, review and follow
these instructions:
1.
Clear the area of bystanders, especially small
children.
2.
Insure that the machine is securely attached to the
tractor with a mechanical retainer through the 3
point hitch mechanism.
3.
Check that the slow moving vehicle sign is in
place, and all the lights and reflectors required by
the highway authorities are in place. Make sure
they are clean and functioning properly.
4.
Check that the tractor is in safe working order.
5.
Plan your route, choose the most direct and safest
path.
6.
Turn the discharge hood and point toward the
tractor to reduce the width of the machine.
7.
Secure chipper components including:
• access covers, and shields: bolted
• rotor housing: bolted
• stow the feed table: secure lock pin
NOTE: When lowering the feed hopper, be aware
of the pinch point between the hopper and
the sub chute.
Z94242
13.2 Stow the Feed Table
(All models except the BX36S.) The feed chute folds
up when not in use for transportation and storage.
1.
Release the feed chute lock pin.
2.
Carefully grasp the front edge of the feed chute
and fold it up to its vertical position.
3.
Secure the feed table by engaging the latch pin
into the pin tab.
Feed Chute Lock
Pin
Fig. 20 –
Feed hopper in stowed position
13. Transporting
TRANSPORTING SAFETY
Summary of Contents for BX36S
Page 1: ...OPERATOR S MANUAL 3PHSelf feedChipper BX36S BX52S BX72S BX102S...
Page 51: ......
Page 52: ...www wallensteinequipment com...
