20
4�3 MACHINE BREAK-IN
Although there are no operational restrictions on
the Wood Chipper when used for the first time, it is
recommended that the following mechanical items
be checked:
A.
After operating for 1 hour:
1.
Ensure the machine is in
Safe Condition
before
checking any components. (See Section 4.1.1).
2.
Torque all fasteners and hardware.
3.
Check condition of rotor bearings.
4.
Check the condition and clearance of the twig-
breaker, rotor and stationary blades. Adjust or
replace as required.
5.
Check for entangled material. Remove all
entangled material before resuming work.
6.
Lubricate all grease fittings.
B.
After operating for 10 hours:
1.
Repeat steps 1 through 6 listed above.
2.
Go to the normal servicing and maintenance
schedule as defined in the Maintenance Section.
4�4 PRE-OPERATION CHECKLIST
Efficient and safe operation of the Wallenstein
3 Point Hitch Wood Chipper requires that each
operator read and understand the using procedures
and all related safety precautions outlined in this
section. A pre-operation checklist is provided for
the operator. It is important for both the personal
safety and maintaining good mechanical condition
that this checklist is followed.
Before operating the Wood Chipper and each time
thereafter, the following areas should be checked
off:
Pre-Operation Checklist
Check and lubricate the machine per the schedule
outline in the Maintenance Section.
Check the rotor housing and discharge chute,.
Remove any blockages, twine, wire or other
material that has become entangled .
Check the condition and clearance of the twig-
breaker, rotor and stationary blades. Adjust or
replace as required.
Check that all bearings turn freely. Replace any
that are rough or seized.
Check and ensure that all covers, guards and
shields are in place, secured and functioning as
designed
Check all fasteners and tighten, and ensure your
equipment is working and in good repair.
Check that personal protection equipment
including hard hat, safety glasses, safety shoes,
safety vest, hearing protection and gloves are used
and in good repair.
Check that all loose fitting clothing or jewellery is
not worn and loose long hair is tied back.
Check that all guards and shields are in place,
secured and functioning as designed.
Z94203
Use Your Personal
Protection Equipment
