19
BXTR6438
Throttle:
This lever controls the engine RPM. Slide the lever to the left to
increase engine speed and right to decrease.
3.1 Kohler CH980 38HP Engine
Always read the engine operator's manual supplied with the machine to familiarize yourself with its operating and
procedure details.
Ignition Switch:
This key operated switch controls the electric power to the engine.
3. Controls
Please review this section to familiarize yourself with the location and function of each control before starting.
The BXTR6438 control panel is laid out so that the controls are easy to see and use. Familiarizing yourself with
the controls will enable you to take advantage of all the features available on the BXTR6438 and apply them as
conditions demand.
OFF
Turn key fully
counterclockwise to stop the electrical
system power and turn the engine off.
RUN / ON
Turn clockwise to the
centre detent for the run position.
This is the position where the engine
will continue to run.
START
Turn fully clockwise to the
last spring-loaded detent position to
engage the starter solenoid and start
the engine. Release the key when the
engine starts and it will return to the
RUN position.
Choke
Ignition
O
OF
FF
F
R
R U
U
N
N
S
S
T
T
A
A
R
R
T
T
O
OF
FF
F
R
R U
U
N
N
S
S
T
T
A
A
R
R
T
T
O
OF
FF
F
R
R U
U
N
N
S
S
T
T
A
A
R
R
T
T
Choke:
This left/right slider controls the position of the choke. Slide the choke
to the right to close the choke for starting when the engine is cold. Slide the
knob to the left to open the choke as the engine warms. Always slide the
choke fully to the left when operating the machine.
Throttle
CHOKE
