21
BXTR6438
3.3 Hood Deflector:
The discharge chute is equipped with a hood
deflector on the end of the chute to direct the
chips exactly where desired. The deflector is held
in position by a slotted position handle.
1. Grasp the handle and lift slightly to clear the
handle cogs.
2.
Move the deflector with the handle as
required.
3.
Lock the deflector into position by lowering the
handle into one of the slots.
Slots
Deflector
Grip Handle
Latch Handle
3.4 Discharge Chute:
The discharge chute is designed with a spring-
loaded latch handle that allows the chute to be
positioned 360° then locked into position with the
latch.
1. Lift the latch handle till the chute lock pin
disengages.
2. Use the latch and grip handles to position the
chute as required.
3. Release the latch handle and lock the chute
into position at the next nearest lock point.
