6.5 Hand Winch
IMPORTANT! Do not get oil or grease on the winch friction
discs. The winch brake system cannot function properly if
exposed to oil or grease.
•
Apply a drop or two of SAE 30 engine oil to each bushing
inside diameter and to the ratchet pawl pivot points.
•
Maintain a thin layer of marine grease on the gear teeth and
shaft threads.
00462
Fig. 44 –
Hand Winch
6.6 Accessory Power Pack
IMPORTANT! Refer to the engine manufacturer's manual
for engine maintenance and service information. The engine
manual is in the manual tube on the side of the conveyor.
6.6.1 Fluids and Lubricants
1. Engine Oil
SAE 10W-30 motor oil is recommended for general use in
the engine, if equipped. Refer to the engine manufacturer's
manual for maintenance and service information.
2. Engine Fuel
The power pack engine is certified to operate on unleaded
gasoline with a pump octane rating of 86 or higher (a
research octane rating of 91 or higher).
3. Storing Lubricants
Your machine can operate at top efficiency only if clean
lubricants are used. Use clean containers to handle all
lubricants. Store them in an area protected from dust,
moisture, and other contaminants.
6.6.2 Maintenance Schedule
Perform maintenance procedures at time shown or hour
interval, whichever comes first.
Every 8 hours or Daily
Check fuel level
Check engine oil level.
Every 50 hours or Annually
Clean engine air filter
Every 100 hours or Annually
Change engine air filter
Change fuel filter
See engine manual
Service and Maintenance
CT24
Trailer Firewood Conveyor
36
