21
4�5 ATTACH TO TRACTOR
Review the transport safety section 2.10 before proceeding.
When coupling or uncoupling the spreader to a tow vehicle, the spreader should always be located on a level, dry
area that is free of debris and other foreign objects.
1. Make sure that all bystanders, especially small
children, are clear of the working area.
2. Make sure there is enough room and clearance to
safely back up to the machine.
3. Use the trailer jack to raise the clevis to the height
of the tow vehicle draw bar
4. Slowly back the tow vehicle until the draw bar and
clevis are aligned.
5. Attach the clevis:
• Place hitch pin through the clevis and draw bar.
• Install the snapper pin to secure the hitch pin.
6. Stow the jack:
• Crank the jack up.
• Pull the jack pin, swivel to its stowed position.
7. Reverse the above procedure when uncoupling.
Crank up the jack
Hitch Pin
Swivel to stowed
position
Snap Lock
Pin
