Safety Signs
WX370
3-point Hitch Wood Splitter
Safety
14
4. Warning!
Keep feet away from falling split wood. Always wear
steel toed foot wear while machine is operating to
avoid serious personal injury.
3.3 Replacing Damaged Safety
Signs
•
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or have
become illegible.
•
Parts that were replaced with a safety decal on
them must also have the safety sign replaced.
•
Replacement safety signs are available from your
authorized Distributor or Dealer Parts Department
or the factory.
3.3.1 How to Install Safety Signs
Ambient temperature must be above 50 °F (10 °C) to
install decals.
1.
Clean and dry the installation area.
2.
Determine exact position before removing the
backing paper.
3.
Peel back the corner of the backing paper.
4.
Align the sign over the specified area and carefully
press the small portion with the exposed sticky
backing in place.
5.
Slowly peel back the remaining paper and carefully
smooth the remaining portion of the sign in place.
6.
Small air pockets can be pierced with a pin and
smoothed out using the piece of sign backing
paper.
