background image

 Safety

WX370 

3-point Hitch Wood Splitter

Safety

8

2.3  Why is SAFETY important?

Three Big Reasons:

• 

Accidents Disable and Kill

• 

Accidents Cost

• 

Accidents Can Be Avoided

The policy of Wallenstein Equipment Inc. is to produce 

products that are safe and reliable. However, even 

when using well-engineered equipment, there is always 

an element of risk. To minimize the risks and promote 

safety at all times, this section of the operator’s manual 

details a number of safety rules that must always be 

followed and obeyed.

YOU

 are responsible for the SAFE operation and 

maintenance of your Wallenstein Trailer Wood Splitter. 

YOU

 must ensure that you and anyone else who 

is going to use, maintain or work around the wood 

splitter be familiar with the operating and maintenance 

procedures and related

 

safety

 

information contained 

in this manual. This manual provides good safety 

practices that should be followed while using the wood 

splitter. 

Remember, 

YOU

 are the key to safety. Good safety 

practices not only protect you but also the people 

around you. Make these practices a working part of 

your safety program. Be certain that 

EVERYONE

 using 

this equipment is familiar with the recommended use 

and maintenance procedures and follows all the safety 

precautions. 

2.4  Safety Rules

•  DO 

give operating instructions to operators or 

employees before allowing them to operate the 

machine.

•  DO

 read and understand ALL 

Safety and Operating instructions 

in the manual and follow them. 

The most important safety device 

on this equipment is a SAFE 

operator. 

•  DO

 review safety related items annually with 

all personnel who are operating the machine or 

performing maintenance.

•  DO

 wear appropriate Personal Protective 

Equipment (PPE). The suggested equipment 

includes but is not limited to the following:

  - Hearing Protection
  - Protective glasses, goggles or face shield
  - Heavy work gloves
  - Protective shoes  with slip resistant soles

 

•  DO

 have a first-aid kit available 

should the need arise and know 

how to use it. 

•  DO

 read and understand all safety signs located 

on the machine before operating, servicing, 

adjusting, or cleaning.

•  DO

 inspect and secure all guards before starting.

•  DO

 have a fire extinguisher available 

should the need arise. Know how to use 

it.

•  DO

 think SAFETY! Work SAFELY!

•  DO NOT 

expect a person who has not read and 

understood all operation and safety instructions 

to use the machine. An untrained operator is 

not qualified and is exposed to possible serious 

injury or death. It is the owner's responsibility 

to make sure to the operator has familiarity and 

understanding of the machine.

•  DO NOT

 allow riders during transport.

•  DO NOT

 risk injury or death by ignoring good 

safety practices. 

Summary of Contents for WX370



































Reviews: