background image

4.  Familiarization

4.1  To the New Operator

It is the responsibility of the owner or operator to read this 
manual and to train all other operators before they start 
working with the machine. Follow all safety instructions 
exactly. 

By following recommended procedures, a safe working 
environment is provided for the operator, bystanders, and 
the area around the work site. Untrained operators are not 
qualified to use the machine.

Many features incorporated into this machine are the result of 
suggestions made by customers like you. Read this manual 
carefully to learn how to use the machine safely and provide 
maximum operating efficiency. By following the instructions 
in conjunction with a good maintenance program, your wood 
splitter can provide many years of trouble-free service.

IMPORTANT!  Make sure all operators understand how to 
put the wood splitter in a Safe Condition before working with 
this machine. See Safe Condition 

page 9

.

4.2  Training

Each operator must be trained in the proper set-up and operating 
procedures before using the machine. 

1. 

Move the unit to a large open area to allow the operator 
to become familiar with control functions and machine 
response.

2. 

Do not allow untrained operators to use the machine. They 
can endanger themselves and others, or damage property 
and the machine.

4.3  Job Site Familiarization

It is the responsibility of the operator to be thoroughly familiar 
with the work site prior to starting. 

1. 

Check for close or cramped work space. Be sure there is 
sufficient space and clearance for the machine to operate.

2. 

Organize the working area to minimize movement.

3. 

Position the machine so prevailing winds blow engine 
exhaust fumes away from operator's station.

Familiarization

WX470 

Skid Steer Wood Splitter

14

Summary of Contents for WX470





































Reviews: