Safety
WX520, WX520L, WX520T
Trailer Wood Splitter
Safety
12
2.11 Being Prepared
1.
Determine where the split wood is going to be piled
ahead of time. Make sure it does not interfere with
safe loading of wood into the splitter.
2.
Precut logs so wood is ready to load into the splitter.
Do not run a chain saw and the splitter at the same
time.
3.
Determine a safe work area location:
• Area must be clear of stones, branches or
hidden obstacles that might cause a tripping,
hooking or snagging hazard.
• Ground should be firm and level.
4.
Operate only in daylight or good artificial light.
5.
Make sure machine is properly adjusted and in good
operating condition.
6.
Store fuel well away from the wood pile.
7.
Perform the
Pre-operation Checklist
procedure
before starting work (see
.
8.
Do not operate on hillsides or when working area is
cluttered, wet, muddy or icy to prevent slipping and
tripping. Operate only on level ground.
9.
Position machine so prevailing winds blow engine
exhaust fumes away from operator's station.
10.
Do not operate machine inside a closed building to
prevent asphyxiation from engine exhaust.
11.
Stop engine when leaving the machine unattended.
Summary of Contents for WX520L
Page 1: ...OPERATOR S MANUAL TrailerWoodSplitter WX520 L WX520T Part Number Z97135_En Rev May 2019...
Page 42: ......
Page 43: ......
