Operating Instructions
WX520, WX520L, WX520T
Trailer Wood Splitter
26
6.7 Fuel Level Check
Check the fuel level daily.
Starting with a full tank helps to eliminate or reduce
operating interruptions for refueling.
The fuel tank is located on the engine. Avoid running the
tank dry.
00198
Fig. 17 –
Fuel Filler Cap
6.7.1 Refueling
Fuel tank capacity:
0.82 US gal (3.1 L).
WARNING!
Fuel vapors can explode causing
injury or death. Do not smoke while
refueling. Keep sparks, fl ames, and hot
components away.
W027
Refuel in a well-ventilated area with the engine stopped.
If the engine has been running, allow it to cool first. Never
refuel the engine inside a building where gasoline fumes
can come in contact with flames or sparks.
For fuel specification, see
. Refer to the engine manual for additional
information on fuels.
1.
Clean the area around fuel tank cap.
Fill the tank
to 1/2" (12 mm) below bottom of filler neck to
provide space for any fuel expansion.
Do not
overfill.
2.
Install fuel fill cap securely and wipe up any spilled
fuel.
6.8 Machine Set-up
IMPORTANT! Park the wood splitter on a level, dry
work area free of debris and other objects.
Position the splitter so the prevailing wind blows
engine exhaust away from the operator.
If a tow vehicle is available, leaving the
splitter attached to it provides greater
stability.
1.
Position the splitter next to the wood to be split.
2.
Leave the splitter attached to the tow vehicle. If no
tow vehicle is available, lower the jack stand and
chock the wheels so the machine is stable.
3.
Make sure working area is clear of stones, branches
or other obstacles.
4.
Precut logs to desired block size, ready to load onto
splitter bed.
5.
Determine where the split wood is going to be piled.
Make sure that location does not interfere loading
splitter.
00639
1
2
Fig. 18 –
Machine Set-up
1. Snap Lock Pin
2. Jack Stand
Summary of Contents for WX520L
Page 1: ...OPERATOR S MANUAL TrailerWoodSplitter WX520 L WX520T Part Number Z97135_En Rev May 2019...
Page 42: ......
Page 43: ......
