WALLTHERM
®
produced and developed by
Walltherm
®
60/64
Extraordinary maintenance
Extraordinary maintenance must be carried out by personnel qualified to work on
the stove model to which this manual refers.
Responsibility for installation
It is not the manufacturer’s responsibility to carry out the works needed to install
the stove. Such works are entirely up to the installer who is requested to check
the flue and air intake and to check if the installation solutions proposed are
feasible. In addition, all the safety standards established by the relevant law in
force in the place of installation must be complied with.
Use
Use of the boiler stove is subject to compliance with all the safety standards established
by the relevant laws in force in the place of installation besides the prescriptions
contained in this manual.
9.b Guarantee
Wallnöfer offers 5 years of guarantee for the body of the Walltherm
®
, not included spare
parts like injector block, grids, glass, seals, flame wall, firebricks... For all the valves and
other components the user may only make use of the legal guarantee, as under the EEC
directive 1999/44/CE, if he has scrupulously complied with the regulations indicated in
this manual, and more specifically:
to work always within the boiler stove’s range of use
maintenance must be constant and accurate
only allow people who are capable and who have been suitably trained to use the
boiler stove.
Failure to comply with the regulations contained in this manual will invalidate the
guarantee immediately.
In any case of possible legal guarantee, the installation of the boiler stove must have
been carried out by people who are authorized and who have been suitable trained to the
Walltherm. Furthermore, a copy of the installation protocol has to be delivered to
Wallnöfer GmbH.
Info: Please send us always the serial number (Label) of your boiler stove and take
pictures of the problem you want talking about.
Wallnöfer informs that the following cases aren`t query reason:
Fireclay:
Because of the high temperature loading, the fireclay can get cracks, in this case it isn`t
necessary to exchange the components, the isolation function is still ensure. The
exchange is only necessary if the fireclay falls apart.