carefully read the manual and refer to its information at all times. Particular attention must be
paid to safety warnings (refer to Section 1.5).
Routine maintenance technician
: qualified operator able to perform routine maintenance of the
equipment by following the instructions in this manual.
Service engineer
: qualified technician, authorized by the manufacturer to perform extraordinary
maintenance of the equipment.
The symbol
appears at certain points in the manual to draw the reader’s attention to
important safety information.
The manufacturer declines any responsibility in case of improper use of the equipment deviating
from the reasonably construed intended use, and for all operations carried out that are not in
compliance with the instructions reported in the manual.
This manual must be stored in an accessible and known place for all operators (installer, user,
routine maintenance technician, service engineer).
1.3 PRODUCT DESCRIPTION
The equipment comprises a single body with paneling in various materials and insulation with
expanded polyurethane foam. The equipment instruments are located on the front panel where the
electrical wiring is housed. The interior parts are fitted with suitable supports for shelves. The
doors are fitted with an automatic return device and magnetic seal elements. During the design
and construction stage all measures have been adopted to implement total safety including radius
interior corners, funnel-shaped base panel to convey condensate to exterior, no rough surfaces,
fixed guards protecting moving or potentially dangerous parts.
1.4 CERTIFICATION
The appliances listed in this manual are manufactured in accordance with the following regulations:
NSF/ANSI7
NSF/ANSI2
ANSI/UL 471
CAN/CSA C22.2 n°120
1.5 GENERAL SAFETY REGULATIONS
Read this manual carefully and follow the instructions contained herein.
The user assumes full responsibility in case of operations carried out without observing the
instructions in the manual.
Do not use this product with flammable gases or flammable solvents.
Do not store flammable gases, flammable liquids or flammable solids in these units.
Primary general safety regulations:
